

SCM40A Satin White
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Payment Options
Shipping Options
“these ATCs… take all in their stride, revealing a lovely cohesion throughout the frequency range. Resolution, timing and dynamics are all spot-on… factor in the built-in amplification, exotically engineered in-house drive units and the resultant exceptional sound quality, and the SCM40As emerge as something of a high-end bargain. Consider us smitten.” What Hi-Fi, March 2015.
Drivers: HF ATC 25mm dual suspension Tweeter, Mid 75mm ATC Soft Dome, LF ATC 164mm SC
Matched Response: ±0.5dB
Frequency Response (-6dB): 48Hz-22kHz
Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
Max SPL: 112dB
Crossover Frequencies: 380Hz & 3.5kHz
Input Connector: Female XLR
Input sensitivity : 1V
Filters : 4th Order critically damped with phase compensation.
Overload Protection : Active FET momentary gain reduction.
Fault Protection : DC fault protection and thermal trip. Fault indication on rear panel mounted LED.
Amplifier Output: 150W LF, 60W MF, 32W HF
Cabinet Dimensions (HxWxD): 980 x 370 x 344mm / 38.58 x 14.56 x 13.54″ (inc. foot plinth & amp, spikes add 25mm to height, grill adds 34mm to depth)
Weight: 36kg
Spikes: 4 per cabinet, M8 x 1.25mm
In the same category
ES-7N walnut
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
Gold 500 6G Satin White
Gold 500 6G
The Gold 500 6G is the flagship model of the new Gold Series 6G. It represents the highest-levels of performance and system design at the price point, and within this competitive market segment. Designed to house the latest MPD III high-frequency transducer alongside the new 3-inch mid-driver and powerful twin 8-inch bass drivers, each of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 500 6G is a worthy flagship for such a prestigious range; a formidable acoustic treat for the ears as well as the eyes.
The flagship Gold 500 6G is engineered to deliver the very highest levels of performance. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and twin 8-inch bass drivers.
SCM19A Satin White
SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Silver 200 7G Black Oak
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
Silver 50 7G High Gloss Black
Silver 50 7G
Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.
Bronze 500 6G White
Bronze 500 6G
The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet, housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter, featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance.
On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction.
With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room.
Gold 500 6G High Gloss Black
Gold 500 6G
The Gold 500 6G is the flagship model of the new Gold Series 6G. It represents the highest-levels of performance and system design at the price point, and within this competitive market segment. Designed to house the latest MPD III high-frequency transducer alongside the new 3-inch mid-driver and powerful twin 8-inch bass drivers, each of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 500 6G is a worthy flagship for such a prestigious range; a formidable acoustic treat for the ears as well as the eyes.
The flagship Gold 500 6G is engineered to deliver the very highest levels of performance. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and twin 8-inch bass drivers.
SCM19 Satin White
SCM19
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral soft dome.
9kg optimised short-coil/long gap motor assembly.
In-house, hand-wound precision flat wire coil.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014
Loke
Lōkē
Wilson Audio's Smallest Subwoofer**
From the beginning, the Wilson Audio Special Application Engineering® team wanted to create a subwoofer system that follows the North Star development parameters set forth by David Wilson. We are excited to demonstrate how much of David's original intent is captured by Lōkē and invite you to visit your local authorized Wilson Audio Dealer for an unforgettable musical experience that will reshape your thinking around small footprint subwoofer systems.
**PLEASE CALL FOR PRICE
Alexia V
Alexia V**
The Alexia V manages to bring order to musical chaos, in a way that I've never heard in an Alexia speaker, or anything in its class
Chris Connaker , Audiophile Style
**PLEASE CALL FOR PRICE
Avior II
Avior II**
Whichever recording I played, I was compelled to listen through to the
end, even when I had other things to attend to, other places to be.
That is the sign of greatness.
— John Atkinson, Editor-in-chief, Stereophile
**PLEASE CALL FOR PRICE
Silver 50 7G Black Oak
Silver 50 7G
Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.
ES-7N black
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
SCM40A Cherry
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
SCM40 Satin Black
SCM40
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
ATC 164mm bass driver.
Massive optimised motor assembly.
ATC Soft Dome mid-range driver.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.” Hi-Fi Choice, October 2014

SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.