SCM40 Satin White

Introduction

Kharma is worldwide known for its technological improvements to every detail of the loudspeakers. The drivers are a very essential element in the creation of a Dutch Masterpiece. Therefore Kharma spends detailed research and development time on improving their drivers time after time. All with the aim of creating the perfect audible Masterpiece.

Elegance Collection

The Kharma Elegance Collection has a modern appeal, but at the same time a heritage that goes back for almost 20 years. The Ceramique line was the successful predecessor of the Elegance Collection. Although the shape of the cabinets has been unchanged, the beauty of the design has been improved in many ways and the audiophile performance seriously increased.

Gold 300 6G

The Gold 300 6G is the mid-sized floorstanding speaker within the Gold Series 6G. It boats a smaller footprint and slimmer profile compared to the 500 6G and offers outstanding levels of performance and system design at its price. Designed to house the latest MPD III high-frequency transducer alongside the new 3-inch mid-driver and powerful twin 6-inch bass drivers, each of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 300 6G delivers music and movie scores with pure, detailed high-fidelity sound.

SCM40

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

ATC 164mm bass driver.

Massive optimised motor assembly.

ATC Soft Dome mid-range driver.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.”  Hi-Fi Choice, October 2014

SCM11

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

Precision undercut bass pole.

“CLD” driver technology with 45mm integral soft dome.

In-house, hand-wound precision flat wire coil.

Massive optimised motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound  ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.”  Hi-Fi Choice, May 2014. Group test winner!

Hyphn

Unique in shape, unparalleled in performance, Hyphn is the result of an intense collaboration between our designers and engineers, who set out to build the best loudspeaker anyone has ever heard.

Featuring the new M-Array high- and mid-frequency driver array and four force-cancelled 8” bass drivers per speaker, Hyphn is capable of delivering an unrivalled listening experience.

SCM7

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

125mm ATC mid-bass unit with integral soft dome.

In-house, hand-wound  ribbon wire mid-bass voicecoil.

Massive optimised mid-bass motor assembly.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“…you will be amazed at its rhythmic and dynamic alacrity.”  Hi-Fi Choice, May 2014. Group test winner!

Silver 200 7G

In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.

Bronze 500 6G

The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet, housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter, featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance.

On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction.

With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room.

SCM19

Overview

New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.

“SL” spec bass driver with 75mm integral soft dome.

9kg optimised short-coil/long gap motor assembly.

In-house, hand-wound precision flat wire coil.

Flat impedance curve allowing easy load for amplifiers.

Veneered Finish Options – Cherry, Black Ash.

Painted Finish Options – Satin Black, Satin White.

6 year warranty.

“Superlative clarity; excellent phase coherence; sublime bass.”  Hi-Fi Choice Magazine, September 2014

Avior II**

Whichever recording I played, I was compelled to listen through to the

end, even when I had other things to attend to, other places to be.

That is the sign of greatness.

— John Atkinson, Editor-in-chief, Stereophile

**PLEASE CALL FOR PRICE

Silver 300 7G

The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.

The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.

„All good things go by three“ is a proverb we often use in Germany if something happens the third time. The new ES-28N is the third model in the current EPOS line-up, and on top of it, it’s a 3-way loudspeaker made by a designer who is well known for doing 2-way systems even with bigger woofers. So what did change his mind*? 

(*answered in Description)

Silver 500 7G

There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.

BACK TO THE FUTURE.

A classic speaker returns to the future.

Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)

Average Impedance: > 6 Ohm 

Minimum Impedance: 4.3 Ohm @ 160Hz 

Sensitivity: 87dB @oe2.823V / 1m 

Distortion: 0.2% THD @ 1W 

Crossover Frequency: 2700 Hz 

Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround. 

HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid 

Dimensions: 491 x 250 x 385 mm (HWD)

Stand: recommended height 515 mm 

Weight: 16 kg without stand 

Finish: Walnut, White semi matte, Black semi matte 

SabrinaX**

With the SabrinaX’s in the house, I smiled whenever I thought about the last time I’d listened to music and looked forward to the next time I’d be able to.

Brian Damkroger , Stereophile

**PLEASE CALL FOR PRICE