

SCM19 Satin Black
SCM19
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral soft dome.
9kg optimised short-coil/long gap motor assembly.
In-house, hand-wound precision flat wire coil.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014
Payment Options
Shipping Options
Drivers: HF ATC 25mm Neodymium soft dome, Mid/LF ATC 150mm SL
Matched Response: ±0.5dB
Frequency Response (-6dB): 54Hz-22kHz
Dispersion: ±80° Coherent Horizontal, ±10° Coherent Vertical
Sensitivity: 85dB @ 1W @ 1metre
Max SPL: 108dB
Recommended Power Amplifier: 75 to 300 Watts
Nominal Impedance: 8 Ohm
Crossover Frequency: 2.5kHz
Connectors: Binding Posts/4mm Plugs, bi-wire
Cabinet Dimensions (HxWxD): 438 x 265 x 300mm / 17.24 x 10.43 x 11.81″ (grill adds 34mm to depth)
Weight: 17.8kg
In the same category
OB-4 black
OB–4
OB–4 is our portable high-fidelity bluetooth loudspeaker featuring a 40 hour rechargeable battery. listen using line input, bluetooth, FM radio or disk mode. OB–4 memorizes everything you play on an endless looping tape, so you can rewind the radio and remix anything, all in OB–4. features a folding handle that doubles as a stand and extended antenna.
Bluetooth, FM–signal, line-in and disk mode
72 hrs radio listening on a single charge or 40 hours of listening via bluetooth
uv resistant paint
compatible with ortho remote and orthoplay app
dimensions: 232.5 x 284 x 57.5 mm | 9.2 x 11.2 x 2.3 in
SCM40A Satin White
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
EOS 2
Gryphon’s Space Mission
As every component in the audio playback chain is relentlessly improved, the listening room has become “The Final Frontier” in the quest for perfect sound. Gryphon’s mission was to develop a compact, visually stunning loudspeaker specifically designed to achieve Full-Range High-End performance in small spaces which are typically inhospitable to ultimate audio performance.
Our answer to this challenge is EOS 2, a state-of-the-art loudspeaker conceived from its inception to bring state-of-the-art sonics to small, acoustically challenging rooms.
Gold 100 6G Satin White
Gold 100 6G
The Gold 100 6G is a substantial stand-mount speaker. A powerful performer, it creates an astonishing soundstage, is capable of deep extended bass and beautifully lifelike MF/HF definition. Its design features the latest MPD III high-frequency transducer, the new 3-inch mid-driver and a powerful 8-inch bass driver, both of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 100 6G delivers outstanding levels of high-fidelity sound with consummate ease.
This Gold 100 6G stand-mount loudspeaker delivers impressive high-fidelity sound, with deep bass and lifelike mid- and high-frequency definition. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and 8-inch bass driver.
Silver 50 7G Black Oak
Silver 50 7G
Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.
Gold 100 6G Macassar Wood Veneer
Gold 100 6G
The Gold 100 6G is a substantial stand-mount speaker. A powerful performer, it creates an astonishing soundstage, is capable of deep extended bass and beautifully lifelike MF/HF definition. Its design features the latest MPD III high-frequency transducer, the new 3-inch mid-driver and a powerful 8-inch bass driver, both of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 100 6G delivers outstanding levels of high-fidelity sound with consummate ease.
This Gold 100 6G stand-mount loudspeaker delivers impressive high-fidelity sound, with deep bass and lifelike mid- and high-frequency definition. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and 8-inch bass driver.
Silver 300 7G High Gloss Black
Silver 300 7G
The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.
The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.
ES-7N walnut
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
Lyra
Lyra**
The musical effect cannot be overstated; the Lyra
sounds alive in a way that other speakers do not.
— Robert Harley, Editor-in-Chief, The Absolute Sound magazine
**PLEASE CALL FOR PRICE
Silver 50 7G Satin White
Silver 50 7G
Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.
Alexx V
Alexx V**
A great artist leaves us with the feeling that something is right in the world.
Leonard Bernstein
**PLEASE CALL FOR PRICE
Silver 500 7G Satin White
Silver 500 7G
There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.
SCM11 Satin Black
SCM11
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
Precision undercut bass pole.
“CLD” driver technology with 45mm integral soft dome.
In-house, hand-wound precision flat wire coil.
Massive optimised motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Silver 500 7G High Gloss Black
Silver 500 7G
There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.
SCM40A Satin Black
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.

SCM19
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral soft dome.
9kg optimised short-coil/long gap motor assembly.
In-house, hand-wound precision flat wire coil.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014