

Gold 100 6G High Gloss Black
Gold 100 6G
The Gold 100 6G is a substantial stand-mount speaker. A powerful performer, it creates an astonishing soundstage, is capable of deep extended bass and beautifully lifelike MF/HF definition. Its design features the latest MPD III high-frequency transducer, the new 3-inch mid-driver and a powerful 8-inch bass driver, both of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 100 6G delivers outstanding levels of high-fidelity sound with consummate ease.
This Gold 100 6G stand-mount loudspeaker delivers impressive high-fidelity sound, with deep bass and lifelike mid- and high-frequency definition. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and 8-inch bass driver.
Payment Options
Shipping Options
Key Features
Three-way design
1 x MPD III high-frequency transducer
1 x 3-inch mid-driver featuring HDT, C-CAM cone technology
Steel mid-pod enclosure with die-cast aluminium baffle
1 x 8-inch bass driver featuring HDT, C-CAM cone technology
New crossover design utilising carefully selected high-quality capacitors
Ported cabinet design using HiVe II port technology and through-bolt technology
Compatible with the ST-2 Universal Stand
Finishes available: Macassar wood veneer, High-Gloss Black and Satin White
Individual driver ‘Magnetic grilles’ included
Specifications
System Format
3-way
Sensitivity (2.83v @ 1m, Free-Field)
86.5 dB
Sensitivity (2.83v @ 1m, Installed)
N/A
Recommended Amplifier Power (RMS into 4 Ohm, Music Signal)
130 – 500 W
Continuous Power Handling (CTA 426-B)
250 W
Nominal Impedance
4 Ohms
Minimum Impedance (20Hz to 20kHz)
3.9 Ohms @ 140 Hz
Drive Unit Complement
1 x 8” (203 mm) HDT C-CAM Bass Drivers
1 x 3” (76 mm) HDT C-CAM Mid-Range Driver
1 x MPD III Tweeter
Frequency Response Free-Field (-6dB)
49 Hz – 60 kHz
Frequency Response, In-Room (-6dB)
32 Hz – 60 kHz
Maximum Peak SPL (AES75, Z-weighted)
119 dB
Bass Alignment
HiVe II Ported
Port Tuning Frequency
38 Hz
Crossover Frequency
LF/MF: 700 Hz
MF/HF: 2.6 kHz
External Dimensions with all accessories fitted (H x W x D)
447.7 x 230 x 357.3 mm (1715/8 x 91/16 x 141/16”)
Weight (each)
14 kg (30 lb 14 oz)
Sold As
Pair
In the same category
Bronze 200 6G Walnut
Bronze 200 6G
Blending audiophile performance with graceful proportions these sleek floor standing speakers are equipped with our 25 mm C-CAM Gold Dome tweeter featuring a Uniform Dispersion (UD) Waveguide and dual 5½" C-CAM mid-bass drivers. The Bronze 200s are real crowd pleasers and deliver a stunning clear, open and detailed sound.
They are kept perfectly in place by sturdy steel outrigger feet and wherever you choose to position them, their elegant styling will ensure they will receive admiring glances.
Our beautifully proportioned Bronze 200 floorstanding speakers deliver a surprisingly large sound. Replete with class-leading Monitor Audio technology they offer the perfect ratio of performance to size.
WATCH Dog
WATCH Dog**
The WATCH Dog is an ultra-high-performance, compact, passive subwoofer. There’s a widespread myth that since subwoofers operate in the low to subsonic frequency range, the sonic quality of the amplifier used to drive them is not critical. Couple that with the fact that FTC-mandated criteria for power amplifier specifications don’t apply to active subwoofers—a loophole which allows manufacturers to wildly inflate performance claims for what are, in many cases (no pun intended) the severely sub-standard amplifiers built into their subwoofers.
**PLEASE CALL FOR PRICE
ES-28N
„All good things go by three“ is a proverb we often use in Germany if something happens the third time. The new ES-28N is the third model in the current EPOS line-up, and on top of it, it’s a 3-way loudspeaker made by a designer who is well known for doing 2-way systems even with bigger woofers. So what did change his mind*?
(*answered in Description)
Silver 50 7G Ash
Silver 50 7G
Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.
ES-7N orange
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
Silver 500 7G High Gloss Black
Silver 500 7G
There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.
SCM7 v3 Satin White
SCM7
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
125mm ATC mid-bass unit with integral soft dome.
In-house, hand-wound ribbon wire mid-bass voicecoil.
Massive optimised mid-bass motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!
SCM11 Cherry
SCM11
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
Precision undercut bass pole.
“CLD” driver technology with 45mm integral soft dome.
In-house, hand-wound precision flat wire coil.
Massive optimised motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Silver 300 7G Natural Walnut
Silver 300 7G
The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.
The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.
ES-14N walnut
BACK TO THE FUTURE.
A classic speaker returns to the future.
Frequency Response: 40Hz – 23kHz (-6dB) 33Hz – 25kHz (-10dB)
Average Impedance: > 6 Ohm
Minimum Impedance: 4.3 Ohm @ 160Hz
Sensitivity: 87dB @oe2.823V / 1m
Distortion: 0.2% THD @ 1W
Crossover Frequency: 2700 Hz
Bass Unit: High Power 7“, 35 mm voice coil diameter, Hybrid Ferrite and Neodymium magnet, injection molded cone with variable thickness and Mica filling. Low hysteresis rubber surround.
HF Unit: 28 mm tweeter with Aluminum/Ceramic compound dome and no Ferrofluid
Dimensions: 491 x 250 x 385 mm (HWD)
Stand: recommended height 515 mm
Weight: 16 kg without stand
Finish: Walnut, White semi matte, Black semi matte
Silver 200 7G Ash
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
SabrinaX
SabrinaX**
With the SabrinaX’s in the house, I smiled whenever I thought about the last time I’d listened to music and looked forward to the next time I’d be able to.
Brian Damkroger , Stereophile
**PLEASE CALL FOR PRICE
Elegance DB7-S
Introduction
Kharma is worldwide known for its technological improvements to every detail of the loudspeakers. The drivers are a very essential element in the creation of a Dutch Masterpiece. Therefore Kharma spends detailed research and development time on improving their drivers time after time. All with the aim of creating the perfect audible Masterpiece.
Elegance Collection
The Kharma Elegance Collection has a modern appeal, but at the same time a heritage that goes back for almost 20 years. The Ceramique line was the successful predecessor of the Elegance Collection. Although the shape of the cabinets has been unchanged, the beauty of the design has been improved in many ways and the audiophile performance seriously increased.
Silver 100 7G Ash
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
SCM20ASL
SCM20ASL | ACTIVE
The active SCM20ASL features an on-board 250W Amp Pack. Simply pair with a suitable pre-amplifier, DAC/pre or streaming-pre-amp for stunning results.
The active SCM20ASL replaces the passive crossover and the driving amplifier of a 'conventional' system with a precisely matched 'Amp Pack', mounted to the rear of the loudspeaker cabinet. The electronic system consists of a balanced input feeding a 2nd order active electronic crossover which, in turn, feeds a pair of class A/B power amplifiers, carefully tailored to the exact requirements of the mid/bass and high-frequency drive units.

Gold 100 6G
The Gold 100 6G is a substantial stand-mount speaker. A powerful performer, it creates an astonishing soundstage, is capable of deep extended bass and beautifully lifelike MF/HF definition. Its design features the latest MPD III high-frequency transducer, the new 3-inch mid-driver and a powerful 8-inch bass driver, both of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 100 6G delivers outstanding levels of high-fidelity sound with consummate ease.
This Gold 100 6G stand-mount loudspeaker delivers impressive high-fidelity sound, with deep bass and lifelike mid- and high-frequency definition. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and 8-inch bass driver.