Silver 100 7G Satin White
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
Payment Options
Shipping Options
Key Features
1 x 1" (25 mm) C-CAM Gold Dome tweeter with Uniform Dispersion (UD) Waveguide II for more lifelike sound
1 x 8" (203 mm) C-CAM mid-bass driver with Rigid Surface Technology (RST) II for extra clarity
Has a full bass extension similar to a floorstanding speaker, covering the full range of a bass guitar
Excellent choice when space is at a premium but sound quality is very important
Rear-ported and tuned for ease of positioning without affecting sound performance
Perfect for smaller stereo music set-ups, or as front/rear channels in smaller home cinema systems
Bookshelf-friendly with rubber stopper feet supplied
Choice of high quality finishes: Satin White, High Gloss Black, including real wood veneers Black Oak, Natural Walnut, Ash
Specifications
System Format
2 - way
Frequency Response, In-Room (-6dB)
35 Hz - 35 kHz
Sensitivity (2.83v @ 1m)
87.5 dB
Nominal Impedance
8 Ohms
Minimum Impedance
4.9 Ohm @ 170 Hz
Maximum SPL (single, free-field)
106 dB
Power Handling (RMS)
120 W
Recommended Amplifier Requirements
40 - 120 W
Crossover Frequency
2.3 kHz
Port Tuning Frequency
42 Hz
Bass Alignment
Bass reflex
HiVe II port system
Drive Unit Complement
1 x 8" C-CAM RST II mid-bass driver
1 x 1" (25 mm) C-CAM Gold Dome tweeter with UD Waveguide II
External Dimensions (Including Grille and Terminals (H x W x D))
375 x 230 x 332 mm (143/4 x 91/16 x 135/64")
External Dimensions (including Outrigger Feet and Spikes (H x W x D))
N/A
Weight
9.4 kg (20 lb 12 oz)
Sold As
Pair
In the same category
Silver 50 7G Black Oak
Silver 50 7G
Designed to give you the deep, rich bass extension usually only found in a larger floorstander, the Silver 50 7G bookshelf speakers are an excellent choice when space is at a premium. It’s engineered for the kind of real-world spaces we live in, which means we’ve optimised the bass for scenarios like being placed close to a wall. With a choice of real-wood veneers, and from Satin White to High Gloss Black, you’ll find the perfect look to fit your home. And most importantly of all, thanks to the new Rigid Surface Technology (RST) II mid-bass driver design, you’ll enjoy pin sharp clarity in every track.
Silver 300 7G Ash
Silver 300 7G
The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.
The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.
Silver 200 7G High Gloss Black
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
ES-7N white
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
Silver 200 7G Ash
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
SCM40 Satin Black
SCM40
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
ATC 164mm bass driver.
Massive optimised motor assembly.
ATC Soft Dome mid-range driver.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Given a serious source and recording the new ATC SCM40 is superb – I know of no price rivals that give this level of accuracy, speed and insight…it’s capable of a level of transparency you normally only expect from loudspeakers at three or four times its price.” Hi-Fi Choice, October 2014
SCM19 Cherry
SCM19
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral soft dome.
9kg optimised short-coil/long gap motor assembly.
In-house, hand-wound precision flat wire coil.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014
SCM19A Cherry
SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Silver 300 7G Satin White
Silver 300 7G
The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.
The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.
SCM7 v3 Satin White
SCM7
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
125mm ATC mid-bass unit with integral soft dome.
In-house, hand-wound ribbon wire mid-bass voicecoil.
Massive optimised mid-bass motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!
SCM40A Satin Black
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
ES-7N walnut
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
Silver 200 7G Satin White
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
SCM40A Satin White
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Bronze 500 6G White
Bronze 500 6G
The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet, housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter, featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance.
On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction.
With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room.