Silver 200 7G Satin White
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
Payment Options
Shipping Options
Key Features
1 x 1" (25 mm) C-CAM Gold Dome tweeter with Uniform Dispersion (UD) Waveguide II for more lifelike sound
2 x 5¼" (134 mm) C-CAM mid-bass driver with Rigid Surface Technology (RST) II for extra clarity
2.5-way design where the top driver is a mid-bass and the bottom is bass only
Following the proportions of our most successful speakers, the Silver 200 7G has a small footprint that fits very easily into any modern home
The best of both worlds – size and performance
Perfect for small to mid-sized room set-ups, either with a stereo or a home cinema system
Rear-ported and tuned for ease of positioning without affecting sound performance
Increased stability with sturdy outrigger feet and a choice of spikes for carpets or rubber feet for hard floors
Choice of high quality finishes: Satin White, High Gloss Black, including real wood veneers Black Oak, Natural Walnut, Ash
Specifications
System Format
2 1/2 - way
Frequency Response, In-Room (-6dB)
34 Hz - 35 kHz
Sensitivity (2.83v @ 1m)
87.5 dB
Nominal Impedance
8 Ohms
Minimum Impedance
5.0 Ohms @ 240 Hz
Maximum SPL (single, free-field)
108 dB
Power Handling (RMS)
150 W
Recommended Amplifier Requirements
60 - 150 W
Crossover Frequency
2.7 kHz
Port Tuning Frequency
49 Hz
Bass Alignment
Bass reflex
Dual HiVe II port system
Drive Unit Complement
2 x 5 1/4" C-CAM RST II mid-bass driver
1 x 1" (25 mm) C-CAM Gold Dome tweeter with UD Waveguide II
External Dimensions (Including Grille and Terminals (H x W x D))
885 x 165 x 272 mm (3313/16 x 61/2 x 103/8")
External Dimensions (including Outrigger Feet and Spikes (H x W x D))
930 x 254 x 329 mm (3639/64 x 10 x 1261/64")
Weight (each)
13.7 kg (30 lb 3 oz)
Sold As
Pair
In the same category
Silver 200 7G Natural Walnut
Silver 200 7G
In creating the Monitor Audio Silver 200 7G speakers, we made lots of small technical decisions – such as enhancing our Rigid Surface Technology (RST) II and coming up with a new crossover system. But all of these complex moves were done with a simple aim in mind. Great, lifelike audio, across all types of music and for all our customers. A choice of real-wood veneers – including new Natural Walnut and Ash options – enables you to integrate your speakers perfectly with the rest of your home, while even the smallest touches make a difference, like the new moulded feet designed specifically for modern hardwood floors and carpets. You might not notice every feature right away, but you can rest assured we’ve carefully considered them all.
SCM19A Satin White
SCM19A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral Soft Dome.
9kg optimised short-coil/long gap motor assembly.
On-board grounded source 182 watt Class A/B Bi-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Silver 100 7G High Gloss Black
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
SCM20 Walnut
SCM20
Overview
The SCM20PSL is ATC’s flagship 2-way stand-mount loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised.
Its sealed cabinet design ensures excellent timing, useful low frequency output below the cut-off and that the speakers can be placed relatively close to walls without excessive low frequency output or ‘boom’.
Silver 500 7G Ash
Silver 500 7G
There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.
Silver 100 7G Natural Walnut
Silver 100 7G
Imagine a bookshelf speaker that gives you richer sound and deeper bass than your old floorstander. That’s what the Monitor Audio Silver 100 7G is capable of. On the outside, a choice of real-wood veneers lets you achieve the perfect look. Inside, a plethora of technologies come together, including metal coned drivers with Rigid Surface Technology, a new tweeter design and a new crossover system that intelligently combines the tweeter and bass driver. If all that just sounds like noise to you, don’t worry. You’ll hear the difference the moment you press play.
SCM7 v3 Cherry
SCM7
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
125mm ATC mid-bass unit with integral soft dome.
In-house, hand-wound ribbon wire mid-bass voicecoil.
Massive optimised mid-bass motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“…you will be amazed at its rhythmic and dynamic alacrity.” Hi-Fi Choice, May 2014. Group test winner!
Silver 500 7G Natural Walnut
Silver 500 7G
There are plenty of technical innovations in the Silver 500 7G. Rigid Surface Technology II that keeps the sound perfectly clear and controlled even at high volume. A crossover system that balances output from the tweeter and bass driver as needed. A consistent and smooth frequency response that sounds great with all genres of music. We could go on, but you only really need to hear one thing: the first note of your favourite song played on a pair of Silver 500 7G speakers. Then you’ll understand why it’s everything the hardened audiophile could want, and everything the casual listener could need.
Silver 300 7G Natural Walnut
Silver 300 7G
The Silver 300 7G speakers incorporate some of our most advanced engineering yet, for sound that will leave you speechless. Much of the technology at play is hidden, but there’s still plenty to feast your eyes on. New grilles, driver trims and feet give an even more refined look, only accentuated by five different choices of wood veneer, including Natural Walnut, Ash, Black Oak, Satin White and High Gloss Black.
The Silver 300 7G features real-wood veneers for a natural look, along with a newly developed Rigid Surface Technology (RST) II driver design for the most natural possible sound. It’s designed to reduce distortion, so when your music’s loud, it remains very, very clear.
SCM19 Satin Black
SCM19
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
“SL” spec bass driver with 75mm integral soft dome.
9kg optimised short-coil/long gap motor assembly.
In-house, hand-wound precision flat wire coil.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
“Superlative clarity; excellent phase coherence; sublime bass.” Hi-Fi Choice Magazine, September 2014
SCM40A Satin Black
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
Bronze 500 6G Black
Bronze 500 6G
The pinnacle of the Bronze series, the Bronze 500s have a larger cabinet, housing a Monitor Audio 25 mm C-CAM Gold Dome tweeter, featuring a Uniform Dispersion (UD) Waveguide, plus two new 8" drivers to power a bigger performance.
On their sturdy steel outrigger feet, the Bronze 500s stand at just under one metre tall and exude a graceful presence, which complements their beautifully detailed audio reproduction.
With their powerful, natural and intricate performance, the Bronze 500s will thrill both music and movie lovers. The speakers look particularly stylish in our new Urban Grey finish, which perfectly complements the décor of a modern room.
SCM40A Satin White
SCM40A
Overview
New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide.
ATC Soft Dome mid-range driver.
ATC 164mm short coil bass driver.
All drive units incorporate massive optimised motor assemblies.
On-board grounded source 242 watt Class A/B Tri-amplifier.
Active crossover filters and overload protection.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.
ES-7N walnut
NEW EPOS MODEL ES-7N
The second model out of three.
Impedance: 4 Ohm, minimum 3 Ohm at 15kHz
Sensitivity: 2.83V, 1m: 86dB/89dB
Woofer: 130mm PP cone woofer
Tweeter: 28mm ceramic coated Aluminum dome
Crossover Frequency: 2.000 Hz
Dimensions: 290 x 200 x 270 mm (HWD)
Stand: recommended height around 700 mm
Weight: 7,6 kg
Finish: Orange semi matte, Walnut, White semi matte, Black semi matte
SCM11 Cherry
SCM11
Overview
New ATC designed and built 25mm soft dome HF unit with precision alloy wave guide.
Precision undercut bass pole.
“CLD” driver technology with 45mm integral soft dome.
In-house, hand-wound precision flat wire coil.
Massive optimised motor assembly.
Flat impedance curve allowing easy load for amplifiers.
Veneered Finish Options – Cherry, Black Ash.
Painted Finish Options – Satin Black, Satin White.
6 year warranty.